Huber HTS15 Heat Transfer Station, (Pump and plate heat exchanger system)

A Huber HTS 15 Heat Transfer Station is a precision temperature-control and liquid-circulation unit used in laboratories and industrial processes. It is essentially a pump and plate heat exchanger system . It takes cooling water from an existing facility water supply or central chiller, transfers that cooling through an internal heat exchanger, and circulates a separate temperature-controlled fluid through the connected equipment. It does not contain its own refrigeration compressor , so it needs an outside source of chilled or cooling water. What it is used for Typical applications include: Cooling or temperature-controlling chemical reactors and bioreactors Condensers and distillation equipment Rotary evaporators Vapor traps Laboratory instruments Process machinery, printing equipment, lasers, or other equipment requiring stable coolant flow Isolating sensitive equipment from dirty or inconsistent plant cooling water The HTS keeps the process side in a separate, closed circulation loop. That helps provide cleaner fluid, more stable pressure, controlled flow, and more accurate temperatures than connecting the equipment directly to plant water. Main HTS 15 specifications Specification Rating Cooling capacity 15 kW , about 51,000 BTU/hr Process temperature range 3°C to 95°C / 37°F to 203°F Temperature stability ±0.1°C Maximum circulation flow 25 liters/minute , about 6.6 GPM Maximum pump pressure 2.5 bar , about 36 psi Cooling-water consumption at rated conditions Approximately 1,600 liters/hour , about 7 GPM Electrical supply 200â240 V, single- or two-phase, 50/60 Hz Weight 38 kg , about 84 lb Dimensions Approximately 15.7 à 19.3 à 20.8 inches Those ratings assume approximately 50°F inlet cooling water, a 68°F process temperature, and adequate water pressure. In plain terms Think of it as a precision intermediary between a buildingâs chilled-water system and a machine . The building water removes the heat, while the Huber controls and pumps a separate fluid loop through the machine. It would be useful wherever the connected equipment needs consistent cooling, controlled temperature, stable pressure, and clean circulating fluid , but does not require a standalone refrigerated chiller. The Pilot ONE touchscreen controller can regulate the temperature, monitor fluid level, trigger alarms, and communicate through Ethernet, USB, or RS-232. PLEASE REVIEW: We would ask that potential buyers please view the photographs carefully, and understand what you are buying. All questions must be submitted PRIOR to auction close. If applicable, we will refund any overpayment of s/h charges. *Your purchase includes a 30 day warranty.* We cannot negotiate price or terms after the auction has closed. Payment is expected within 24 hours of auction close, please. We appreciate your consideration! (bcd - yt)